You are thinking about purchasing a boat. That is wonderful, but do you know how a boat or ship manages to not float off to sea? Mooring attach to moorings that are secured in different ways.
It is important to understand that most moorings are permanent. This is because they do not cause as much damage to the environment. They can also be used to hold a dock in place, which is helpful for floating docks.
The simplest type of mooring is a swing mooring. These are made with an anchor at the waterway bottom with a cable, chain or rope attached to a float on the surface. The float makes it easier for vessels to find the mooring. Another type of swing mooring is the fore and aft, which is just a pair of swing moorings. These swing moorings make it where the boat does not move as much.
For areas where the bottom of the waterway is rocky, the dead weight mooring is the best option. This is a large concrete block with rope, chain or cable attached to it. A float is on the topside of the water to identify the mooring.
One of the most modern moorings is the screw-in. A diver does all the installation and inspection on these. However, these are a great new alternative because they hold tons of weight in place for their size and weight. They are also cheaper and only require a diver to make any repairs on it upon a bad inspection.
The most common method of mooring for small boat owners is bollards. These are large wooden or metal objects that the mooring lines CT are wrapped around. This is probably the easiest method for newer boat owners. It is also the method that the navy uses the most when they are docked.
Mooring lines in CT is very effective when used properly. The easiest way to properly learn to moor is to have an experienced captain go with you the first few times. This way they can train you how to properly moor your boat so that you do not damage it.
