Having an inadequate hydraulic pump means that it will eventually fail if it is not sufficient for the job involved. If a pump has failed or the need for a new Hydraulic Pump in Joliet has been determined, it is crucial to know in advance what type of pump should be purchased. Here is a rough guide as to exactly what hydraulic pump should be used in a given situation.
Constant Loads
When the loading is constant, and of a consistent nature, experts agree that the best pump to use is either a single-piston pump or a double-acting pump. The simplest systems requiring a hydraulic pump are those that are consistent. When the loads are going to vary, there may be a need to use a load-sensing hydraulic pump. These load-sensing systems bear far less wear and tear on their mechanics and require a minimal amount of energy compared to their single-piston versions.
Variable Loads
If the load is one that offers hardly any resistance but which requires a more forceful nature later on, then the Hydraulic Pump in Joliet Illinois used should be a double-piston pump that is also dual-speed. A prime example of a common load that would require this type of pump would be a cylinder which advances towards the load. This advancing results in a greater amount of cutting and bending power.
Multi-Directional Loads
When the dual-piston pump is working a load that is also variable in direction, it may require a four-way valve. The direction on the valve can be changed by simply using a handle which is located on the valve itself. While standard valves will have an “in” port and an “out” port, a four-way valve will have two “in” ports and two “out” ports.
Generally speaking, it is a good idea not to pick a hydraulic pump based on simple assumptions. If one is unfamiliar with hydraulic pumps, or if they have already blown one out due to inappropriate size, they should contact an experienced company such as Miller Hydraulic Service Inc to either do the pumping for them or for advice on which hydraulic pump would be best for their situation.
